Distribution / Products
Carbon Potentiometer,
Cermet Potentiometers
 |
|
|
The Datasheets of the ACP Potentiometers are availlable in the Acrobat pdf format. They need the free available software Acrobat Reader. For inquiries, technical datas and
offers to Potentiometers please click here.
|
|
Back to Distribution / Productselection |
|
|
Type |
 |
 |
 |
 |
 |
 |
 |
||
|---|---|---|---|---|---|---|---|---|---|
| Description | 6mm trimming carbon potentiometer in vertical or horizontal mounting versions. SMD version available in Tape&Reel packaging | 9mm carbon/cermet potentiometers, for trimming or control. Up to 20 detents available for position setting or for feeling, also with special tapers (exclusive feature) | 14mm carbon/cermet potentiometers, mainly used for control. Up to 38 detents available to set position or for feeling, also with special tapers (exclusive feature) | 9mm, 14mm control carbon/cermet potentiometers for sturdier applications. Bushing for panel mounting. Plastic housing and shaft | Low cost switches
in 6, 9, or 14mm. Two outputs: ON-OFF-ON |
Low cost 14 mm sensor for position control or sensing. 150.000 cycles, vertical adjust. 3% linearity. Smooth rotation feeling | Special designs tailored to clients’ needs. ACP has an ISO C clean room facility and laser trimming equip. | ||
| Common features | Square
shape, plastic housing, IP 5 protection Electrical tapers: linear (Lin), log, antilog and special tapers available on request. Laser trimming available for special requirements on tolerance. Accessories (thumbwheels and shafts) can be ordered separately or already mounted. Highly customizable based on terminal configuration and pitch. |
Switching angle at 30º±15º (1) | Customizable based on taper, rotational life, terminal set up, linearity, etc. | Features depend on materials choice Low tolerance available >1%, linearity <5%, etc. | |||||
| Packaging | Bulk, Tape&Reel (SMD) | Bulk | Bulk, T&R optional (SMD) | Blister | External aspect
and features, as for CA and CE models |
Bulk, T&R opt(SMD) | |||
| Mech.
rotation angle |
235 ± 10º | 240 ± 5º | 265 ± 5º | Features for MCA and MCE are the same as of the corresponding CA and CE models | External
aspect and features, as for CA and CE models |
265 ± 5º | |||
| Electr. rotation angle | 215 ± 20º | 220 ± 20º | 245 ± 20º | 245 ±20º | |||||
| Terminal Type | SMD, PC | PC | PC, panel hole, SMD(opt. | PC, SMD | |||||
| Element Type | Carbon | CA Carbon | CE Cermet | CA Carbon | CE Cermet | Carbon | Carbon / Cermet | ||
| Op. Temperature | -25ºC / +70ºC | -25ºC / +70ºC | -40ºC / +125ºC |
-25ºC / +70ºC | -40ºC / +125ºC |
-40ºC / +85ºC | -40ºC / + 125ºC | ||
| Power
Rating Lin Log or anti-log |
0.10 W 0.06 W |
0.15 W 0.10 W |
0.5 W | 0.25 W 0.13 W |
0.7 W | Power
ratio For 6mm: 15V/12mA For 9, 14mm: 24V/15mA |
0.15 W | ||
| Max
voltage Lin Log or anti-log |
100 VDC 60 VDC |
200 VDC 150 VDC |
200 VDC | 250 VDC 200 VDC |
250 VDC | 38VDC –standard (1) | |||
| Resistance
Range Linear taper Log or anti log taper |
(1) CA6
SMD: 100Ohm to 1MOhm 1KOhm to 1MOhm |
(1) 100Ohm = Rn = 5MOhm 1KOhm ... 2,2MOhm |
(1) 100Ohm = Rn = 5MOhm 1KOhm ... 2,2MOhm |
Insulation resistance: 1GOhm | 10K standard resistance (1)) | From 10Ohm to 1MOhm per square | |||
| Rotational
Life std Long life |
1000 (1) |
1000
(for detents: =10K) 10.000 (1) |
1000
(for detents: 10K) 10.000 (1) |
10.000 (1) | 10.000 (1) | 150.000 (1) | From 10.000 up to millions of cycles | ||
| Max Stop Torque | 4Ncm | 5 Ncm | 10Ncm | 9mm: 25Ncm
14mm: 15Ncm |
as for CA and CE models | 10Ncm | |||
| Max torque on rotor | 9.8N | 40N | 50N | 9mm: 50N
14mm: 80N |
as for CA and CE models | 40N | |||
| Potentiometer Type | Commercial | Commercial | Commercial | Commercial | Commercial | Commercial | Custom | ||
Product
overview ACP; Poti, Potentiometers